The ELVT5350 is designed exclusively for surface installation on the shop floor. We strongly advise against in-ground installation, as the lift is not legally approved for this purpose.
€3,799.00
Ready for dispatch, Delivery time 2 - 4 days
Product information "TRUSTERS ELVT5350 | Low Profile Double-Scissor-Lift 3,500 kg | 105 mm"
- 3,500 kg lifting capacity: Suitable for many cars, SUVs and light commercial vehicles within the lift’s rated capacity. The maximum lifting height of 1,930 mm provides space for underbody work.
- Just 105 mm drive-on height: The low-profile design allows installation on the workshop floor without a recessed pit. For particularly low vehicles, check the ground clearance and approach angle beforehand.
- Four-cylinder master-slave system: Both platforms rise and lower in sync. There is no need to briefly raise the lift before lowering it to release mechanical safety locks.
- Sturdy double-scissor construction: Two platforms provide a robust foundation for inspections, maintenance and repairs.
- Flexible installation: The separate, lockable control and hydraulic unit can be installed on either side of the lift.
- Practical features: Fold-down drive-on ramps make access easier. Four rubber lifting blocks to help protect the vehicle’s lifting points are included.
| Drive: | hydraulic |
|---|---|
| Type of lifting plattform: | scissor lifts |
| Capacity range: | 2,5 t - 3,5 t |
Login
The TRUSTERS ELVT5350 lifts vehicles weighing up to 3,500 kg to a maximum height of 1,930 mm. With a low drive-on height of just 105 mm, this double-scissor lift can be installed above ground without a recessed pit. Its sturdy scissor construction, four-cylinder master-slave hydraulic system and fold-down drive-on ramps make it a practical choice for maintenance, repairs and vehicle care. The separate, lockable control unit can be positioned on either side of the lift.
Features of the TRUSTERS ELVT5350
Explore the details that make working on vehicles more convenient — from the low drive-on height to the synchronized movement of both platforms.
Just 105 mm drive-on height
The low-profile design allows above-ground installation without a recessed pit. Its low height also makes the lift suitable for many lowered vehicles. Check the vehicle’s ground clearance and approach angle before driving onto the platforms.
Four-cylinder master-slave system
The four-cylinder master-slave system keeps both platforms moving in sync. There is no need to briefly raise the lift before lowering it to release mechanical safety locks.
Control unit can be installed on either side
The separate control and hydraulic unit has a lockable housing. It can be positioned on either side of the lift, allowing you to adapt the layout to your workshop space.
Sturdy double-scissor construction
Two generously sized platforms and a robust scissor construction provide a solid foundation for working on vehicles weighing up to 3,500 kg. The maximum lifting height of 1,930 mm creates space for underbody inspections and repairs.
Four rubber lifting blocks included
Four rubber lifting blocks are included. They support the vehicle at its designated lifting points and help protect its underside.
Fold-down drive-on ramps
The ramps make it easier to drive onto the low platforms. Their fold-down design also helps provide access to the vehicle while you work.
Ideal for:
- Professional automotive and body repair workshops
- Vehicle inspections and maintenance
- Tyre and brake servicing
- Classic car care and restoration
- Home garages and dedicated DIY mechanics
Detailed product description
The ELVT5350 has a maximum lifting capacity of 3,500 kg. It is suitable for many cars, SUVs and light commercial vehicles within this weight limit.
From a minimum height of 105 mm, the lift rises to a maximum of 1,930 mm. Fold-down ramps make driving onto the platforms easier, and no recessed pit is required.
Four hydraulic cylinders work together in a master-slave system to keep both platforms synchronized during lifting and lowering. A double safety lock helps prevent one-sided movement, while an upper limit switch prevents the lift from travelling beyond its maximum height.
Flexible layout: The lockable
control unit can be positioned on either side
of the lift.
Convenient lowering: There is
no need to raise the lift first to release
mechanical safety locks.
Useful accessories included:
Four rubber lifting blocks are supplied
with the lift.
| Technical specifications | |
|---|---|
| Lifting capacity | 3,500 kg |
| Maximum lifting height | 1,930 mm |
| Minimum / drive-on height | 105 mm |
| Distance between platforms | 900 mm |
| Total platform length (incl. ramps) | 2,105 mm |
| Width per platform | 660 mm |
| Base width | 1,450 mm |
| Lifting time | ≤ 50 s |
| Lowering time | ≥ 20 s |
| Noise level | ≤ 75 dB |
| Gross weight | 887 kg |
| Power supply | 230 V |
| Colour | Jet black RAL 9005 |
| Scope of delivery |
|---|
| 2 × scissor lift platform in black |
| 1 × control and hydraulic unit with lockable housing |
| 4 × rubber lifting block |
| Connecting lines and installation hardware |
Questions we have received from other customers
Yes. With a minimum platform height of just 105 mm, the ELVT5350 has a very low profile and is suitable for many lowered vehicles. For particularly low cars, we also recommend our RR1001 drive-on ramps. They raise the vehicle by 50 mm, creating enough clearance for the lift to fit underneath. This allows you to lift most low-clearance vehicles safely.
Yes, you can. The scissor structure is delivered pre-assembled, so installation involves only a few steps: position the lift, route the hydraulic hoses, connect the power supply, fill the hydraulic oil, anchor the lift to the floor and attach the drive-on ramps. You’ll find detailed step-by-step instructions in the operating manual supplied with the lift.
The ELVT5350 is designed exclusively for surface mounting on the workshop floor. We strongly advise against a flush-mount installation, as the lift is not legally approved for this. The reason for this lies in the drive-on ramps at the ends of the platform: their handles protrude from the sides. Furthermore, lowering the lift with the ramps folded down would create recesses in the floor at the ends of the platform. In daily workshop operations, this would be impractical and pose a significant tripping hazard. If you are looking for a flush-mount solution, we would be happy to advise you on suitable alternatives.