Our scissor lifts are CE-compliant and designed according to DIN EN 1493. Safety features: mechanical pawls, emergency lowering, limit switch, synchronization and overload protection.
Scissor lifts for your workshop
Compact design, high load capacity, precise hydraulics - from OMCN, Ravaglioli, TRUSTERS and other brands.
Short stroke and long stroke, above ground or below ground, 230 V or 400 V. Choose according to load capacity, lifting and drive-over height, platform length and floor requirements. On request with assembly, UVV initial acceptance and fast delivery. We would also be happy to advise you personally.
ATH-Flex Lift 30 " 3 t lifting capacity " Powder coated
Product number:
FlexLift30
Delivery time, 45 days.
Consul 0.30 KH, short stroke lift " 3 t lifting capacity
Product number:
333-0-30KH
Delivery time, 35 days.
Delivery time, 120 days.
Delivery time, 35 days.
OMCN 550 " 2,5 t lifting capacity " Mobile " 400V
Product number:
OMCN-550-400V
Delivery time, 35 days.
Delivery time, 90 days.
OMCN 718M - XL | 3.5t double scissor lift | above ground | long version
Product number:
OMCN718M
Delivery time, 30 days.
Delivery time, 30 days.
OMCN 719M - XL | 3.5t double scissor lift | underfloor | long version
Product number:
OMCN719M
Delivery time, 30 days.
OMCN 890 | Scissor Lift 6t | Flat Runways Surface 5100 mm
Product number:
OMCN890
Delivery time, 120 days.
OMCN 890/I | Scissor Lift 6t | Flat Runways In-ground 5100 mm
Product number:
OMCN890/I
Delivery time, 120 days.
OMCN 890/I+853/B | Scissor Lift 6t | Flat Runways In-ground 5500 mm
Product number:
OMCN890/I+853/B
Delivery time, 120 days.
OMCN 890+853/B | Scissor Lift 6t | Flat Runways Surface 5500 mm
Product number:
OMCN890+853/B
Delivery time, 120 days.
OMCN 891 | Scissor Lift 6t | Wheel Alignment Surface 5100 mm
Product number:
OMCN891
Delivery time, 120 days.
OMCN 891/I | Scissor Lift 6t | Wheel Alignment In-ground 5100 mm
Product number:
OMCN891/I
Delivery time, 120 days.
OMCN 891/I+853/B | Scissor Lift 6t | Wheel Alignment In-ground 5500 mm
Product number:
OMCN891/I+853/B
Delivery time, 120 days.
OMCN 891+853/B | Scissor Lift 6t | Wheel Alignment Surface 5500 mm
Product number:
OMCN891+853/B
Delivery time, 120 days.
OMCN 892 | Scissor Lift 6t | Wheel Alignment Surface 5100 mm + Wheel-Free
Product number:
OMCN892
Delivery time, 120 days.
OMCN 892/I | Scissor Lift 6t | Wheel Alignment In-ground 5100 mm + Wheel-Free
Product number:
OMCN892/I
Delivery time, 120 days.
OMCN 892/I+853/B | Scissor Lift 6t | Wheel Alignment In-ground 5500 mm + Wheel-Free
Product number:
OMCN892/I+853/B
Delivery time, 120 days.
OMCN 892+853/B | Scissor Lift 6t | Wheel Alignment Surface 5500 mm + Wheel-Free
Product number:
OMCN892+853/B
Delivery time, 120 days.
OMCN 893 | Scissor Lift 6t | Alignment+Play Detector Surface 5100 mm
Product number:
OMCN893
Delivery time, 120 days.
OMCN 893/I | Scissor Lift 6t | Alignment+Play Detector In-ground 5100 mm
Product number:
OMCN893/I
Delivery time, 120 days.
OMCN 893/I+853/B | Scissor Lift 6t | Alignment+Play Detector In-ground 5500 mm
Product number:
OMCN893/I+853/B
Delivery time, 120 days.
Which scissor lift is the right one for me?
Quality & selection from experts at a top price with over 40 years of experience
Scissor lifts for professional use combine a compact design with high load capacity and precise lifting technology. Models from long-established manufacturers – e.g. B. OMCN and others – are designed for durability, reliable hydraulics and easy-to-maintain components. Depending on the requirements, short-stroke and long-stroke variants, above-floor or below-floor, with 230 V or 400 V are available. Typical selection criteria include load capacity, lifting height, platform length, drive-over height and ground requirements. This creates workshop equipment that pays off in daily operations through efficiency and a long service life. We would be happy to advise you personally via telephone or email.
What types of scissor lifts are there?
Underground scissor lifts
Integrated flush with the floor, they ensure a completely free work surface and optimal ergonomics. Ideal for tire changes, bodywork and maintenance work. They offer a high-quality appearance, are safe to operate and extremely space-saving.
Above-floor scissor lifts
Quickly installed, flexibly relocatable and with a low access height. Perfect for service, tire and brake work; Robust construction, high load capacity, attractive price-performance.
Mobile scissor lifts:
Compact and movable for flexible locations. Ideal for acceptance points, small workshops and on the go; 230 V options, short lifting times, minimal space requirement.Different recording methods for scissor lifts
Scissor lifts are available in various versions, which differ in their mounting technology and intended use:
Double scissor lifts
This type has short driving surfaces and lifts the vehicle directly at the defined lifting points. They are ideal for service work, wrapping, bodywork and smart repair tasks. They are available both as short-lift platforms with a lifting height of up to approx. 1 m and as high-lift versions with a lifting height of up to 2 m.
Driving surface scissor lifts
Scissor lifts of this type have two large, drivable platforms. They can optionally be equipped with a wheel-free jack - an integrated additional scissor that raises the vehicle again at the regular lifting points. Alternatively, an axle-free jack can be used, which can be moved on rollers between the two driving surfaces and can specifically lift individual axles. This design is ideal for service acceptance, wheel alignment, joint play tests and all work where free wheels or a stable, horizontal vehicle position are required.Which scissor lift for which job?
Body work
All-round access to the vehicle and a comfortable working height for precise work can be ideally carried out using mobile or short-stroke solutions.
Changing tires
Because a high-quality scissor lift delivers strong performance even at low heights, it is ideal for quick service jobs. Our experience speaks for mobile or short-stroke solutions.
All-round service
From small service to complete repairs - uncomplicated and efficient, we recommend a stationary, electro-hydraulic platform with a higher load capacity, optionally as an underfloor version for maximum freedom of movement.
Frequently asked questions about scissor lifts
Can I set up the stage anywhere?
In principle, the floor requirements specified by the manufacturer must be adhered to for all versions. Underfloor models also require a suitable installation shaft and an appropriately tested floor structure. The manufacturer's information on concrete quality, floor thickness and anchoring are crucial. We will be happy to support you in checking the requirements.
What are the advantages of a scissor lift?
Depending on the model, it is suitable for a wide range of maintenance and repair work - mobile or stationary. From motorcycles to trucks and even armored vehicles: our strongest scissor lifts lift up to 60 tons. The uniform scissor movement ensures optimal load distribution.
How does a scissor lift work?
An electric motor drives a hydraulic pump that delivers oil to the cylinders. The cylinders extend, raise the scissor structure and bring the vehicle to working height. The oil flows back via a drain valve; the stage lowers in a controlled manner.
How much does a scissor lift cost?
Mobile short-stroke variants usually start at around 2,000-4,000 € and are usually designed for loads of around 3 tons. Scissor lifts with full lifting height start at around €4,000, depending on the load capacity, equipment and design.
Is a floor-level (underfloor) installation possible?
Yes. Underfloor stages create a continuous, floor-level surface. The prerequisites are an installation shaft, suitable concrete and correct cable/service routing. The planning should ideally be included in the new building/conversion.
230 V or 400 V – which is better?
230 V offers flexible installation and is sufficient for many car applications. 400V delivers faster lift times and reserves for heavy vehicles and continuous use. The choice depends on the vehicle mix, frequency of use and infrastructure.
How long does assembly and acceptance take?
Many models are already around 80% pre-assembled and can be installed in about half a day. The acceptance or initial UVV inspection is carried out by a lifting platform fitter or a testing centre such as TÜV or DEKRA. Our team will be happy to assist you with scheduling and instruction.
What maintenance is required?
Daily visual inspections, regular lubrication according to plan and annual UVV/safety inspection. It is best to check the hydraulic oil level and wearing parts (e.g. hoses, seals, rubber blocks) regularly.
Depending on the model, very low overall height, ideal for lowered vehicles. You can find exact millimeter information in the technical data of the respective stage.
Typically approx. 1.9-2.0 m. This means you can work ergonomically while standing with all-round access. Please check the model-related values in the data sheet.
Mobile stages offer flexibility and easy relocation. Stationary variants are optimized for higher loads, faster lifting times and continuous use.
From cars to large SUVs and – depending on the load capacity and platform length – also vans. Important: Compare the total weight, wheelbase and mount/adapter with the specifications.
For many vehicles, standard rubber plates are sufficient. In some cases, however, vehicle-specific rubber pads or adapters make sense in order to optimally hit the approved mounting points and protect the body.
Electro-hydraulic drives operate moderately loudly. The volume varies depending on the pump/performance. For noise-sensitive areas, we recommend installing the control unit separately.
Daily visual inspection, weekly lubrication points check, quarterly function check, annual UVV/safety inspection. Check/replace hydraulic oil level, hoses and seals regularly.
Operating instructions, foundation and anchoring diagram, electrical connection diagrams, maintenance diagram and test certificates for the initial acceptance.
Yes. In addition to the lifting height, there must be sufficient upward safety distance - for example to the ceiling, lights or gates. The following applies as a guideline: lifting height + vehicle height + approx. 20-30 cm reserve.
The flatness affects hub synchronicity and safety. Deviations outside the manufacturer's tolerances should be corrected by compensating mass/underlays before installation.
Scissor unit, unit/control, anchoring material, basic accessories (rubber blocks/ramp plates depending on the model), documentation. Optional: extensions, mobile kits, oil filling.
Only with models designed for this purpose and corrosion-resistant components. Pay attention to IP protection classes, drainage of the shaft (if underground) and weather protection of the unit.
Depending on the manufacturer. The usual time is 12-24 months, sometimes different for wear parts. Extended service packages are available upon request.
For common SUVs we recommend a load capacity of 3.5-4.0 t. Check the vehicle weight and wheelbase and compare these with the platform length and mounting adapters. We would be happy to advise you personally.
Your scissor lift for flexible use - quality from an expert with over 40 years of experience Hebebuehne24.de
If you are looking for workshop equipment that is not only available at fair prices, but also meets all requirements in terms of quality then you've come to the right place. In addition to our scissor lifts, we offer you a large selection of products in our range that you can rely on. Whether it's a heavy-duty truck lift, body tools, robust jack stands or individual parts for tire mounting: with us you'll find everything you need for your work.
Our products come from manufacturers who have proven themselves on the market. Our OMCN 718 / 719 scissor lift – one of our top sellers – is just one example of this. From truck lifts to motorcycle lifts, only the highest quality awaits you in our range. Order the all-rounder among scissor lifts now and benefit from fair prices and the best workmanship with us.
We have the largest range of spare parts for lifts and workshop equipment - quickly available, with a high level of parts coverage and reliable delivery. This keeps downtime to a minimum and keeps your workshop productive.
We are experts in our field and are happy to share our knowledge and many years of experience with you. If you need further information about scissor lifts or have questions about other products, we will be happy to advise you and show you which lift is suitable for your purposes. Contact us using our contact form or call our service hotline. We will help you find the right product for your workshop.
