Hydraulic oil for presses and lifting platforms, 46, 1 liter container

Hydraulic oil HLP 46 according to DIN 51524 - part 2 for lifts and presses

• Viscosity: 46
• Contents: 1 Liter
• High wear and corrosion protection
• High load-carrying capacity
• Rapid demulsification
• Outstanding lubricating film stability
• Outstanding thermal stability
• High-pressure and oxidation-resistant
• Good compatibility with common sealing materials

This hydraulic oil is specially selected to maximize the performance, reliability and life of your hydraulic lift. The viscosity of this special oil is 46.

Use only for hydraulic lifts where a 46 viscosity hydraulic oil is specified by the manufacturer.

Can be used for the following Lifts:

Hint: Viscosity is a decisive factor for hydraulic oil. Please select the viscosity according to the respective specifications of your device. You can also find 22 and 32 hydraulic oil in our store.

• 2-post lifts
• 1-post lifts
• Mobile lifts
• Motorcycle lifts
• Scissor lifts
• 4-post lifts

Scope of delivery: 1 liter canister with screw cap

The hydraulic oil HLP 46 fulfills the following specifications / requirements

• DIN 5124-2 (HM)
• AIST 126
• ASTM D 6158 (HM)
• Bosch Rexroth RDE 90235
• Eaton E-FDGN-TBoo2-E
• Fives P68 - P69 - P70 (HM)
• GB111158.1-2011 (L-HL, L.HM GM LS-2)
• ISO 11158 (HM)
• JCMAS P041 HK Hydraulic specification
• Parker (Denison) HF-0, HF-1, HF-2 (HM)
• SAE MS 1004 (HM)
• SEB 181222

Suitable for the following models, among others

ATH:

• Cross Lift 50

Consul:

• 4.40 (H329 H305 H371 H338 H372 H373 H374 H375 Z073 Z106)

Hofmann:

• Duolift HL 3500 / 4500 (12 liters), Quattrolift 4000 WA (12 liters)

OMCN:

• 154/ML, 154/MR, 156, 156/ML, 156/MR, 156/W
• 161, 161/R, 161/W, 162, 162/R, 162/W, 163, 163/R, 163/W, 164, 164/R, 164/RP, 164/RPA, 164/RS, 164/W, 164/WS
• 199W, 199/YC
• 204, 204/R, 204/RE, 204/RPA, 204/W, 205/R, 280/R, 280/W
• 400, 401, 402, 403
• 540, 541
• 700, 706, 708, 718, 719
• 800, 810, 825, 850
• 901, 911, 995, 970
• P30/MR, P30/ML, P30/W

Stertil Koni:

• KO 4200, KO 4040, KS 4045, KS 4240,
• ST 1072

Zippo:

• 2205, 2305, 2306, 2405, 8090, 8091

Safety instructions:

The usual precautions for handling chemicals are to be observed. Wear suitable protective clothing. Avoid inhalation, swallowing and skin contact. After inhalation: supply fresh air; consult doctor in case of complaints. After contact with eyes: rinse eyes with open eyelids under running water for several minutes. If swallowed: if symptoms persist consult doctor.

Contaminated packaging should be emptied as far as possible and after appropriate cleaning it can be recycled.

Note on waste oil disposal:

After use, this oil must be disposed of at a waste oil collection point! Improper disposal of waste oil endangers the environment! It is not allowed to mix foreign substances such as solvents, petrol, brake fluids and coolants.